Vertical and horizontal register control, with a touch panel

SKT -001 has been newly developed for easier operation and suitable AC servo motor control by improving DT-950MⅡ now being highly reputed.

Product features

  • Clear display by a TFT color touch monitor. (15-inch)
  • USB port for mouse operation.
  • Instructions for guidance are prepared in Japanese, English, and    Chinese.(language can be switched on display.)
  • Automatic gate set-up function.
    (applicable to forward and reverse marks.)
  • An optimum correction quantity can be set by “one-touch” operation by the conditions of printing materials.
  • Prevention of wrong correction by a fail-safe function.
  • Optical fiber type scanning head is mounted as the standard equipment.
  • Monitor uses ultrasonic touch monitor with high bright visibility and has superior durability and scratch resistance.
  • Individual operation of the A system and B system is possible when used as a split printing.
  • Can be used with up to 16 colors.

Specifications and capacities

Applicable printer Web-fed gravure rotary press
Correction compensation function Length : Compensator roll correction system
             (applicable for AC servo motor)
Sidelay : Lateral move system by using cylinders
             (Use a single-phase synchronous register motor)
Detection accuracy Length : ±0.01 mm
Sidelay : ±0.01 mm
Applicable printing speed 10 to 1000 m/min (CY1000mm)
Correction speed Length : Standard 1 mm/sec (on web)
Sidelay : Standard 0.4 to 0.6 mm/sec
             (Cylinder move quantity)
Fine adjustment range ±9.99 mm in each direction
Detection color A practical color visible against white or black.
Alarm setting range 0.1 to 0.9mm variable
Power supply AC100/200~240 V ±10% 1ø 50/60 Hz 1KVA
Environmental Condition Temperature : 0 to 40 degrees (Touch Monitor 5 to 35 degrees)
Humidity : 25〜80 %RH (no condensation)


Main body 1unit
Scanning head (paper/transparent film type) number of channels pieces (printing units -1)
Optical fiber type :
Ff head (Vertical and horizontal register mark
arrangement correspond to both.), Optical fiber cable , junction box
LED type : HW head or RB head , junction cord , junction box
Pulse generator (number of channels) cords
Scanning head relay box (number of channels) units
Pulse generator Line shaft drive machine : 1 piece (2 pieces in case of a split type)
Sectional drive (compensator-less) machine :

Standard configuration

Main body

Scanning head(Ff type)

Optical fiber cable

Scanning junction Box

Pulse generator(PGV type)

Operation panel

Initial settings screen

Oscillator screen

Register control screen

Graph screen